Description
The smallest PocketWizard radio ever, the MiniTT1 ® Transmitter is part of a new generation of PocketWizard radios providing i-TTL and power control capabilities with Nikon Speedlights and select studio lights. Your creativity also extends far beyond X-Sync speeds with HyperSync and FP Sync capabilities.
The MiniTT1 locks onto the camera’s hot shoe, supporting an on-camera flash with its own hot shoe while working with remote PocketWizard units. Remotes can be one or more PocketWizard FlexTT5 ® Transceivers connected to Nikon CLS / i-TTL flashes or any PocketWizard Receiver for triggering flash or remote cameras.
The MiniTT1 Transmitter is easy to use; just slide in place and begin to shoot. The new PocketWizard ControlTL ® System interprets the complex CLS / i-TTL data being sent through the camera’s hot shoe and digitally transmits it in a reliable radio signal. Change the exposure compensation dial on the camera, and those commands pass seamlessly through the system to your remote flash. Adjust your aperture or ISO and the system automatically corrects for those changes.
Add the PocketWizard AC3 ZoneController to easily adjust up to three zones of light independently, in both i-TTL or manual. PocketWizard ControlTL radio communication allows you to shoot farther, faster, around corners, through walls even at high noon in bright daylight. Now you can deploy a wireless i-TTL flash system wherever you want, without infrared limitations, in seconds.
Transmitter Technology

* Click Here for the Latest List of Compatibiliy
* Click Here for the Visual Demonstration
Specifications
|
TTL Compatibility
|
Nikon CLS / i-TTL
|
|
Frequency:
|
340.00 - 354.00 MHz US FCC / IC 433.42 - 434.42 MHz CE
|
|
Channels:
|
52 Channels over 26 Frequencies (FCC/IC) 35 Channels over 5 Frequencies (CE)
|
|
Antenna:
|
Internal
|
|
Transmit output power:
|
Less than 0.001 watt (1/1000 of a watt or 1 milliwatt)
|
|
Range Performance:
|
Up to 800 feet (10 to 240 meters) for CLS / i-TTL triggering depending on flash used, antenna orientation and other variables.
Up to 1200 feet (10 to 365 meters) for basic triggering depending on flash used, antenna orientation and other variables.
|
|
Mounting:
|
Hot shoe only
|
|
Maximum Shooting Rate*:
|
TTL Mode: within approximately 1 FPS of camera's maximum FPS
Basic Trigger Mode: Camera Max FPS * dependent on flash power settings FPS = Frames Per Second
|
|
Power / Channel Switch:
|
OFF - C.2 - C.1
|
|
Status Indicator:
|
LED, Green, Amber, Red status indications
|
|
Voltage Present:
|
3.3 VDC (all pins) - safe for all cameras
|
|
Hot Shoe voltage protection
|
Hot Shoe: up to 50V
|
|
USB:
|
USB Compliant 2.0, Mini-B Connector
|
|
Operating Temperature:
|
above -15C (5 F) and below 50 C (120 F)
|
|
Storage Temperature: (without battery)
|
above -30 C (-22 F) and below 85 C (185 F)
|
|
Construction:
|
High impact plastic, captive battery door Hot shoe made of glass reinforced resin
|
|
Power:
|
3 V Lithium battery, CR2450 (included) or CR2354 Lithium coin cell type
|
|
Battery Life:
|
30 - 50 hours of camera "awake time" depending on shooting habits
|
|
Dimensions:
|
2.8" (7.1 cm) long x 1.9" (4.9 cm) wide x 1.3" (3.3 cm) tall
|
|
Weight:
|
2.3 oz (65 grams), 2.0 oz (57 grams) without battery
|
|
Included in the box:
|
MiniTT1 Transmitter, USB cable, CR2450 battery, Quick Guide
|